High‐tuning‐range CMOS band‐pass IF filter based on a low‐Q cascaded biquad optimization technique

A design procedure for high‐order continuous‐time intermediate‐frequency band‐pass filters based on the cascade of low‐Q biquadratic cells is presented. The approach is well suited for integrated‐circuit fabrication, as it takes into account the maximum capacitance spread dictated by the available technology and maximum acceptable sensitivity to component variations. A trade‐off between noise and maximum linear range is also met. A novel, wide‐tuning‐range transconductor topology is also described. Based on these results, a 10‐pole band‐pass filter for a code division multiple‐access satellite receiver has been designed and tested. The filter provides tunable center frequency (f₀) from 10 to 70 MHz and exhibits a 28‐MHz bandwidth around f₀ = 70 MHz with more than 39‐dB attenuation at f₀/2 and 2f₀. Third‐order harmonic rejection is higher than 60 dB for a 1‐Vpp 70‐MHz input, and equivalent output noise is lower than 1 mV_rms. The circuit is fabricated in a 0.25‐µm complementary metal oxide semiconductor process, and the core consumes 12 mA from a 2.5‐V supply, offering the best current/pole ratio figure. The die area resulted to be 0.9 × 1.1 mm². Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization of the spark plasma sintering processing parameters affecting the properties of polyimide

The present study deals with the optimization of polyimide (PI) mechanical properties, obtained by Spark Plasma Sintering (SPS), by using a method combining Design of Experiments (DOE) with physical, structural, and mechanical characterizations. The effects of SPS parameters such as temperature, pressure, dwell time, and cooling rate on the density, mechanical properties, and structure of PI were investigated. The experimental results revealed that the mechanical properties of the material were optimized by raising the sintering temperature up to 350°C. The optimized SPS processing parameters were a temperature of 350°C, a pressure of 40 MPa, and a dwell time of 5 min. Under these conditions, a relative density of 99.6% was reached within only a few minutes. The corresponding mechanical properties consisted of Young's modulus of 3.43 GPa, a Shore D hardness of 87.3, and a compressive strength of 738 MPa for a maximum compressive strain of 61.8%. Moreover, when working at 320°C and at 100 MPa, an increase in the dwell time was necessary to enhance the properties. Contrary to the other parameters, the cooling rate appeared to be a non‐significant parameter. Finally, correlations between the PI structure and the mechanical properties were made to demonstrate the densification mechanisms. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41542.     

Vitamin E acetate addition to poly(d,l)lactic acid modifies its mechanical behavior without affecting biocompatibility

Mechanical properties of poly(d,l )lactic acid films enriched with Vitamin E and Vitamin E Acetate (5–40% w/w) were investigated. The addition of both formulations resulted in increased polymer Young's modulus and tensile strength. Human foreskin fibroblasts and murine pre‐osteoblasts were used to assess the biocompatibility of polymers. Pre‐osteoblasts adhesion and proliferation were strongly decreased by Vitamin E, whereas Vitamin E Acetate did not alter cell proliferation. Collagen deposition was lower onto Vitamin E blended polymers than onto native and Vitamin E Acetate blended ones. Fibroblasts adhesion and proliferation were increased by both Vitamin E and Vitamin E Acetate addition. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39970.     

Polymer brush coatings for combating marine biofouling

A variety of functional polymer brushes and coatings have been developed for combating marine biofouling and biocorrosion with much less environmental impact than traditional biocides. This review summarizes recent developments in marine antifouling polymer brushes and coatings that are tethered to material surfaces and do not actively release biocides. Polymer brush coatings have been designed to inhibit molecular fouling, microfouling and macrofouling through incorporation or inclusion of multiple functionalities. Hydrophilic polymers, such as poly(ethylene glycol), hydrogels, zwitterionic polymers and polysaccharides, resist attachment of marine organisms effectively due to extensive hydration. Fouling release polymer coatings, based on fluoropolymers and poly(dimethylsiloxane) elastomers, minimize adhesion between marine organisms and material surfaces, leading to easy removal of biofoulants. Polycationic coatings are effective in reducing marine biofouling partly because of their good bactericidal properties. Recent advances in controlled radical polymerization and click chemistry have also allowed better molecular design and engineering of multifunctional brush coatings for improved antifouling efficacies.     

Significant others and contingencies of self-worth: Activation and consequences of relationship-specific contingencies of self-worth.

Three studies tested the activation and consequences of contingencies of self-worth associated with specific significant others, that is, relationship-specific contingencies of self-worth. The results showed that activating the mental representation of a significant other with whom one strongly desires closeness led participants to stake their self-esteem in domains in which the significant other wanted them to excel. This was shown in terms of self-reported contingencies of self-worth (Study 1), in terms of self-worth after receiving feedback on a successful or unsatisfactory performance in a relationship-specific contingency domain (Study 2), and in terms of feelings of reduced self-worth after thinking about a failure in a relationship-specific contingency domain (Study 3). Across studies, a variety of contingency domains were examined. Furthermore, Study 3 showed that failing in an activated relationship-specific contingency domain had negative implications for current feelings of closeness and acceptance in the significant-other relationship. Overall, the findings suggest that people’s contingencies of self-worth depend on the social situation and that performance in relationship-specific contingency domains can influence people’s perceptions of their relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Reoptimization of the Shortest Common Superstring Problem

A reoptimization problem describes the following scenario: given an instance of an optimization problem together with an optimal solution for it, we want to find a good solution for a locally modified instance.     

Modelling and performance of a small siphonic hydropower system

A siphon turbine is a low-head, axial-flow hydropower device that can be installed across an impound structure, such as a weir. A laboratory-scale siphon turbine and generator system is built from both off-the-shelf components and bespoke components designed using well-documented guidance. This paper proposes a modelling method for the system, which allows performance to be assessed as a function of operating variables including head, electric load, runner speed and flow rate. An un-modified, commercially available propeller is used for the runner, whose blade geometry is defined within the model as a set of polynomials. This enables flow angles at any radial position on a blade to be determined as a function of the system operating point. Consequently, the impact of design changes on system performance can be quantified, such as part-load efficiency for example. Testing using the laboratory-scale system is conducted up to a maximum gross head of 0.25 m, to validate the component models and then to demonstrate that the final system model provides satisfactory agreement with experiments over the operational speed and head range. The model therefore permits rapid conceptual design to be carried out without the need for computationally intensive co-optimisation of components.     

DOMAIN OF INFLUENCE IN THERMOELASTICITY WITH ONE RELAXATION TIME

A domain-of-influence theorem for an initial-boundary-value problem of thermoelasticity with one relaxation time, proposed by Lord and Schulman, is established. The theorem asserts that for a finite time t > 0 a pair (<φ, ), in which φ and are the thermoelastic potential and temperature, respectively, generates no thermoelastic disturbances outside a bounded domain D_t.     

Pavement Life-Cycle Cost and Asphalt Binder Quality: Theoretical and Experimental Investigation

Quality control/quality assurance tests can be used to demonstrate that an as-constructed pavement has characteristics different from the contracted specifications of the as-designed pavement because the bitumen employed was of insufficient quality. Many different issues affect asphalt binder quality. Such problems can significantly increase the pavement life-cycle cost, which means that a pay adjustment (PA) is needed. Unfortunately, the quantitative analysis of this issue is very complex. The objectives of this study were to model the dependence of the pavement life-cycle cost on asphalt binder quality and to determine the quantitative relationship between bitumen viscosity and the PA for a given class of boundary conditions. In addition to modeling this problem theoretically, experiments and simulations were carried out through the use of the Mechanistic-Empirical Pavement Design Guide. We then derived the consequences of these effects on life-cycle cost by using a specific life-cycle cost model. Our results demonstrate that asphalt binder viscosity can strongly affect the expected pavement life and the PA, and thus needs to be taken into account in contract and construction management.